← 返回列表

十分钟教会你MIPS编程入门

单站 物联网IoT安全 发布 Fri, 15 Jan 2021 20:00:00 +0800 入库 2026-11-18T08:40:02

thoupin 2021-01-15 20:00

十分钟教会你入门MIPS汇编

本文从四个方面来介绍MIPS架构及其汇编:

1. 寄存器种类

2. 算术及寻址指令

3. 程序结构

4. 系统调用

需要使用的工具是:Mars4.4

下载地址:

http://courses.missouristate.edu/KenVollmar/mars/download.htm
1 数据类型

1. 所有MIPS指令都是32位长

2. 1字节 = 8位,半字长 = 2个字节,1字长 = 4个字节

3. 一个字符空间 = 1个字节

4. 一个整型 = 一个字长 = 4个字节

5. 单个字符用单引号,例如:'b'

6. 字符串用双引号,例如:"A string"

2 寄存器

1. MIPS下一共有32个通用寄存器

2. 在汇编中,寄存器标志由$符开头

3. 寄存器表示可以有两种方式

直接使用该寄存器对应的编号,例如:从$0到$31

使用对应的寄存器名称,例如:$t1,$sp(详细名称见下表)

4. Lo和Hi寄存器专门用来存储乘法和除法的结果

对于以上两者,不存在直接寻址;必须要通过特殊指令mfhi ("move from Hi") 和 mflo ("move from Lo")来访问内容

5. 栈的走向是高地址到低地址

3 程序结构

1. 本质其实就是数据声明 + 普通文本 + 程序编码(文件扩展名为 .s或者 .asm都可以)

2. 数据声明在代码段之后(其实在之前也没啥问题,也更符合高级程序的设计习惯)

数据声明:

1. 数据段以.data为开始标志

2. 声明变量后,即在主存中分配空间

代码:

1. 代码段以 .text为开始的标志

2. 其实就是各项指令操作

3. 程序入口为main:标志(这个都一样)

4. 程序结束标志

注释:

1. 是注释符

2. MIPS程序的基本模版如下:

`.data`

`.text`

main:

4 数据声明

声明的格式:

name: storage_type value(s)
通常给变量赋一个初始值;对于.space,需要指明需要多少大小空间(bytes)

注意:name后面始终要跟着冒号

example``var1: .word 3 # create a single integer variable with initial value 3``# 声明一个 word 类型的变量 var1, 同时给其赋值为 3

array1: .byte 'a','b'``# create a 2-element character array with elements initialized``# to a and b``# 声明一个存储2个字符的数组 array1,并赋值 'a', 'b'

array2: .space 40 # allocate 40 consecutive bytes, with storage uninitialized``# could be used as a 40-element character array, or a``# 10-element integer array; a comment should indicate which! # 为变量 array2 分配 40字节(bytes)未使用的连续空间,当然,对于这个变量``# 到底要存放什么类型的值, 最好事先声明注释下!

5 加载保存【读取写入】

1. 如果要访问内存,不好意思,你只能用 load 或者 store 指令

2. 其他的只能都一律是寄存器操作

load: lw register_destination, RAM_source # copy word (4 bytes) at source RAM location to destination register. # 从内存中 复制 RAM_source 的内容到 对应的寄存器中(lw中的'w'意为'word',即该数据大小为4个字节) lb register_destination, RAM_source # copy byte at source RAM location to low-order byte of destination register,and sign-extend to higher-order bytes # 同上, lb 意为 load byte

store word: sw register_source, RAM_destination # store word in source register into RAM destination # 将指定寄存器中的数据 写入到指定的内存中 sb register_source, RAM_destination # store byte (low-order) in source register into RAM destination

load immediate: li register_destination, value # load immediate value into destination register

举例

.data var1: .word 23 # declare storage for var1; initial value is 23

.text __start: lw $t0, var1 # load contents of RAM location into register $t0: $t0 = var1 li $t1, 5 # $t1 = 5 ("load immediate") sw $t1, var1 # store contents of register $t1 into RAM: var1 = $t1 done

6 立即与间接寻址

load address: la $t0, var1 # 将var1的RAM地址复制到寄存器$t0中``indirect addressing: lw $t2, ($t0) #将$t0中包含的RAM地址的值加载到$t2中 sw $t2, ($t0) # 将寄存器$ t2中的值存储到$ t0中包含的地址的RAM中``based or indexed addressing: lw $t2, 4($t0) # 将RAM地址($t0+4)的值存到$t2寄存器 sw $t2, -12($t0) # 将$t2寄存器的值存到地址($t0-12)中

不必多说,要用到偏移量的寻址,基本上使用最多的场景无非两种:数组,栈。

`.data`        `array1:    .space  12`    `#  declare 12 bytes of storage to hold array of 3 integers`    `#  定义一个 12字节 长度的数组 array1, 容纳 3个整型`    `.text`        `__start:`            `la  $t0, array1`              `#  load base address of array into register $t0`          `#  让 $t0 = 数组首地址`          `li  $t1, 5`              `#  $t1 = 5   ("load immediate")`          `sw $t1, ($t0)`              `#  first array element set to 5; indirect addressing`          `# 对于 数组第一个元素赋值 array[0] = $1 = 5`          `li $t1, 13`              `#   $t1 = 13`          `sw $t1, 4($t0)`              `#  second array element set to 13`          `# 对于 数组第二个元素赋值 array[1] = $1 = 13`           `# (该数组中每个元素地址相距长度就是自身数据类型长度,即4字节, 所以对于array+4就是array[1])`          `li $t1, -7`              `#   $t1 = -7`          `sw $t1, 8($t0)`              `#  third array element set to -7`          `# 同上, array+8 = (address[array[0])+4)+ 4 = address(array[1]) + 4 = address(array[2])`

7 算术指令集

1. 最多3个操作数

2. 在这里,操作数只能是寄存器,绝对不允许出现地址

3. 所有的指令统一是32位 = 4 * 8 bit = 4 bytes = 1 word

add  $t0,$t1,$t2   # $t0 = $t1 + $t2; add as signed (2's complement) integers sub $t2,$t3,$t4     #  $t2 = $t3, $t4 addi $t2,$t3, 5     # $t2 = $t3 + 5;   "add immediate" (no sub immediate) addu $t1,$t6,$t7     # $t1 = $t6 + $t7;   add as unsigned integers subu $t1,$t6,$t7     # $t1 = $t6 + $t7;   subtract as unsigned integers mult $t3,$t4     # multiply 32-bit quantities in $t3 and $t4, and store 64-bit    # result in special registers Lo and Hi:  (Hi,Lo) = $t3 * $t4 div $t5,$t6     # Lo = $t5 / $t6   (integer quotient)    # Hi = $t5 mod $t6   (remainder) mfhi $t0     # move quantity in special register Hi to $t0:   $t0 = Hi mflo $t1     # move quantity in special register Lo to $t1:   $t1 = Lo    # used to get at result of product or quotient    move  $t2,$t3  #  $t2 = $t3

8 控制流

branches分支(if else系列)

指令内置了分支条件的比较:

b target # unconditional branch to program label target``beq $t0,$t1,target # branch to target if $t0 = $t1``blt $t0,$t1,target # branch to target if $t0 < $t1``ble $t0,$t1,target # branch to target if $t0 <= $t1``bgt $t0,$t1,target # branch to target if $t0 > $t1``bge $t0,$t1,target # branch to target if $t0 >= $t1``bne $t0,$t1,target # branch to target if $t0 <> $t1

Jumps跳转(while,for,goto系列)

j  target  #  unconditional jump to program label target # 看到就跳转,不用考虑任何条件 jr  $t3    # jump to address contained in $t3 ("jump register")           # 类似相对寻址,跳到该寄存器给出的地址处

子程序调用 subroutine return: "jump register" instruction

jr $ra # "jump register"
跳转到寄存器$ra中保存的返回地址(由jal指令存储)

如果说调用的子程序中有调用了其他子程序,如此往复, 则返回地址的标记就用栈(stack)来存储, 毕竟 $ra 只有一个,(哥哥我分身乏术啊)

9 系统调用和输入/输出

1. 通过系统调用实现终端的输入输出,以及声明程序结束

2. 学会使用 syscall

3. 参数所使用的寄存器:$v0, $a0, $a1

4. 返回值使用:$v0

大概意思是要打印的字符串应该有一个终止符,估计类似C中的'\0', 在这里我们只要声明字符串为 .asciiz 类型即可。下面给个我用Mars4.4的提示:

1. 对于读取整型, 浮点型,双精度的数据操作, 系统会读取一整行,(也就是说以换行符为标志 '\n')

2. read_string和fgets类似

举例 打印一个存储在寄存器$2里的整型:

Print out integer value contained in register $t2

li  $v0, 1      # load appropriate system call code into register $v0;                   # 声明需要调用的操作代码为 1 (print_int) 并赋值给 $v0 # code for printing integer is 1``move $a0, $t2 # move integer to be printed into $a0: $a0 = $t2 # 将要打印的整型赋值给 $a0``syscall         # call operating system to perform operation

举例 读取一个数,并且存储到内存中的 int_value 变量中:

Read integer value, store in RAM location with label int_value (presumably declared in data section)``li $v0, 5 # load appropriate system call code into register $v0; # code for reading integer is 5``syscall # call operating system to perform operation``sw $v0, int_value # value read from keyboard returned in register $v0;              # store this in desired location

举例 打印一个字符串(这是完整的,其实上面栗子都可以直接替换main: 部分,都能直接运行

`.data``string1    .asciiz  "Print this.\n"``# declaration for string variable,` `# .asciiz directive makes string null terminated`

`.text`        `main:    li  $v0, 4`  `# load appropriate system call code into register $v0;``# code for printing string is 4`                 `la  $a0, string1``# load address of string to be printed into $a0`                  `syscall`  `# call operating system to perform print operation`

举例 执行到这里,程序结束,立马走人,管他后边洪水滔天\~\~

li $v0, 10   # system call code for exit = 10``syscall # call operating sys

参考引用:

本文属于转载非原创,略有修改: https://www.cnblogs.com/thoupin/p/4018455.html``这篇文章的英文原版地址在这里: https://minnie.tuhs.org/CompArch/Resources/mips_quick_tutorial.html

原文链接:https://mp.weixin.qq.com/s?__biz=MzUzMjcxMzg5Mg==&mid=2247487952&idx=1&sn=e9baae9620ab421c7bfcc5c5552d40d7