← 返回列表

ARTEX and Friends: Enter Agentic Offensive Frameworks

单站 Mandiant / Google Threat Intel 入库 2026-11-17T04:48:25

ARTEX and Friends: Enter Agentic Offensive Frameworks

Google Threat Intelligence Group
Mandiant

Written by: Aurora Blum, David Mainor, Rohit Nambiar, Omar ElAhdan, Matthew McWhirt, Will Silverstone, Bhavesh Dhake, Chris Busse

Introduction

Recent intrusions in which threat actors have been observed weaponizing agentic frameworks to execute highly-automated intrusions has put a spotlight on evolving adversarial use of LLMs. In our September 2026 report, Google Threat Intelligence Group (GTIG) noted that forward leaning adversaries were beginning to transition from basic prompting to agentic workflows and LLM-enabled automation.

Since this publication, GTIG and Mandiant have observed multiple threat actors abusing the open-source, agentic pentesting frameworks ARTEX, Hexstrike and CAIRN in incident response engagements to conduct a broad range of actions across multiple phases of the attack life cycle. This activity has been seen across the threat landscape, as noted in a recent Wiz report. The emergence of Artex and similar agentic offensive intrusion frameworks underscores a broader shift toward threat actor adoption of open source multi-agent offensive frameworks, as well as potentially custom agentic harnesses.

This represents a paradigm shift towards intrusions occurring at machine speed, with the automated chaining of complex attack paths scaling intrusions exponentially. While the mechanics of the intrusions remain the same, such as using compromised credentials and targeting unpatched systems, the speed and scale at which frameworks can exploit these known weaknesses introduces a new defensive challenge. Security teams, developers, and system administrators will need to fundamentally rethink defense strategies to counter scalable, autonomous software. We also provide defensive strategies from Mandiant Consulting. The defensive strategies suggested—control-plane isolation, short-lived credentials, least privilege, segmentation, and behavioral detection—are long-standing security best practices.

Observations in the Wild

We are seeing tools used by adversaries evolving towards autonomous agentic attacks. One way this is occurring is through suites of tools or frameworks designed for penetration testing (“pentesting”). These tools and frameworks orchestrate various agents using open source and frontier LLMs to automate various stages of intrusions. Historically, cyber espionage and financially motivated threat actors have taken advantage of pentesting or red-teaming platforms built for security professionals to exploit systems, such as Cobalt Strike or Metasploit. Today, adversaries are pivoting toward offensive frameworks powered by LLMs. While these frameworks have existed in the wild, they are now yielding success in intrusions in the wild, representing a critical evolution that increases both the speed and scale of intrusion activity.

Since late August 2026, we have observed threat actors actively operating popular open-source multi-agent pentesting platforms like ARTEX, PentAGI, CAIRN and other potentially custom harnesses within Mandiant incident response engagements; use of these platforms has been further corroborated by our research telemetry. In these incidents, we have observed agentic activity conducting significant parts of the attack lifecycle (e.g., lateral movement, database exploitation, exfiltration preparation). Evidence of in the wild usage of these frameworks marks a critical inflection point for defenders, as agents now autonomously explore multiple attack paths, troubleshoot errors, and achieve objectives in seconds and minutes. Coupled with continual advancements in underlying LLM capabilities, the acceleration in attack velocity and scale signals a notable shift in the threat landscape that fundamentally alters traditional intrusion dynamics.

ARTEX Framework

ARTEX is an autonomous, multi-agent LLM-driven pentesting and offensive command-and-control (C2) platform written in Go with an embedded Next.js web console. The framework was originally developed by the user Autumn-27 and released on GitHub. Although the original repository was taken down by its creator in October 2026 due to widespread threat actor abuse, the framework continues to proliferate globally via community forks, including localized variations such as ScopeWeaver and a commercial version dubbed ARTEX PRO. ARTEX abstracts the attack lifecycle across six specialized sub-agents. By leveraging APIs from frontier and open source models, the framework translates high-level tactical goals into actionable machine commands. GTIG has observed capabilities including automated Active Directory reconnaissance, privilege escalation, target cloud-infrastructure profiling (such as harvesting Azure storage keys), to the synthesis and deployment of custom webshells.

Since late August 2026, ARTEX has been adopted by a diverse range of threat actors across the motivational spectrum, including both financially motivated extortion groups and suspected cyber espionage operators. For example, the Wiz Research team has been tracking a campaign associated with ARTEX, which GTIG tracks as UNC7228, that overlaps with activity tracked by Microsoft as the PRC-nexus actor STORM-0940. The research has expanded Wiz’s understanding of this campaign beyond the October IT focused activity with activity now dating back to at least August 2026. Wiz identified the targeting, compromise, and data theft affecting multiple entities in the US and Europe across the enterprise software, industrial automation, semiconductor manufacturing and design, and telecommunications industry verticals. This actor has moved extremely quickly, typically moving from their first compromised account to deep system access in around four hours and in one case as rapidly as 15 minutes. They have also customized their tooling to take advantage of victim-specific setups and fallen back to open proxies if their initial infrastructure was blocked.

Demonstrating broader adoption of ARTEX, GTIG and Mandiant observed multiple other threat actors using ARTEX for post-compromise reconnaissance, lateral movement, and privilege escalation in incident response investigations. This includes financially motivated threat actors who used the framework to facilitate data theft extortion, and additional suspected PRC-nexus clusters. Their operations collectively impacted organizations across government, technology, chemicals and materials, and manufacturing sectors in the US, alongside public reporting of ARTEX targeting the financial sector in Asia.

In several cases, adversaries provided ARTEX with compromised credentials for the targeted organization, and instructed the framework to execute subsequent stages of the attack lifecycle. Analysis of these intrusions reveals key differences between activity conducted by the ARTEX framework and that of a human operator:

In another case, during access-probing efforts, ARTEX generated files of various extension types with the filename artex-probe-*, where * carried five digit somewhat-incremental numbers. Based on our visibility, it’s difficult to comment on the exact significance of these numbers or how they increment. However, ARTEX was seen using similar incremental numeric markers within dropped file names, created account names, their passwords and within email subjects.

Observed ARTEX Activity Mapped along the phases of a targeted attack lifecycle

PentAGI Offensive Framework

GTIG also observed in the wild abuse of PentAGI (Penetration Testing Artificial General Intelligence), an autonomous offensive framework designed to automate the pentesting process within an isolated environment. Developed by VXControl, the framework is offered in an open source and commercial edition. It is designed so that the user only needs to describe a target and a goal, which enables entry-level users to run complex cyber security campaigns. Once the target and the goal have been selected, the framework uses a team of specialized agents, each with their own functionalities to break tasks (called “Flows”) into various sub-tasks, execute each step, and report on it. The tools and commands are all run in isolated sandboxes running Kali Linux instead of in the host environment. All the tools used by PentAGI are open-source pentesting tools available by default in Kali Linux (e.g., metasploit, nmap, SQLmap). The framework supports over a dozen cloud and local LLM backends, including frontier and open weight models.

The majority of observed PentAGI activity remained at the stage of WHOIS asset mapping or active vulnerability scanning. However, analysis of operational artifacts indicates that some operations progressed to active intrusions and persistence across multiple organizations. Operators are also adapting and integrating the framework in different ways. In one case, we identified a customized attack orchestration platform built on the open-source version of PentAGI likely used between at least late August and early October 2026 to conduct systematic reconnaissance and vulnerability scanning against a wide range of organizations in Asia, including system integrators and major telecommunications firms. In another instance, we observed PentAGI chained with proxy services to target the Aerospace sector.

Evolution of Autonomous Offensive Frameworks

We are seeing a significant maturation in the application of LLM capabilities across the threat landscape in a short period of time; this includes the incorporation of LLM-written malicious code, development of dynamic LLM-enabled malware, poisoning of agent-harness files, and the building of multi-agent offensive frameworks. Notably, between late 2025 and October 2026, autonomous and semi-autonomous offensive frameworks crossed a decisive operational threshold to multi-agent frameworks actively weaponized by threat actors to perform in the wild intrusions.

GTIG has been tracking the evolution of this experimentation over time, from simple prompting of LLMs to help with coding, through the use of frameworks in the wild towards a potential future with fully autonomous frameworks running intrusions. In a fully autonomous attack, a human’s role would consist of telling the agent what to target, and then simply benefiting from the operational objective.

At the time of reporting, we assess that the current adversary use of autonomous offensive frameworks is still in early stages characterized by open source tools currently being used in low-sophisticated ways, resulting in broad and noisy, but still successful campaigns. As the sophistication of these frameworks, the underlying LLMs and the orchestrating human-operator increase, we expect to see not only less human interaction, but also increased stealth and sophistication.

The following stages represent our observations of how LLM-augmentation in cyber operations have evolved over the last year and how we expect this development to continue:

Stage 1: Prompt-based use of LLMs

Stage 2: Embedding LLM capabilities into malware

Stage 3: Incorporating LLM-enabled automation into operations

Stage 4: Developing and experimenting with autonomous frameworks  

Stage 5: Multiple attack lifecycle stages being conducted by LLM-driven tooling in the wild

Stage 6: Multi-agent-driven, unsophisticated attacks with little to no human interaction 

Stage 7:  Sophisticated, fully autonomous/agentic attacks 

We believe malicious actors will continue to experiment with these offensive agentic frameworks, moving towards future autonomous usage. GTIG has observed evidence of threat-actor experimentation with tools like the ZeroHollow inference service and the fully agentic framework AgentZero.

Outlook

Over the past 12 months, GTIG has observed a decisive evolution in adversarial tradecraft leveraging LLMs, progressing from ad hoc operational productivity support toward the deployment of coordinated, multi-agent, autonomous offensive frameworks. While earlier milestones documented in our quarterly research highlighted early agentic interest, recent observations across frontline incident response engagements and proactive intelligence collection reveals adversary adoption of these frameworks to automate discrete phases and specific operational tasks during intrusions. Threat actors are increasingly leveraging generative models to achieve unprecedented speed and scale, actively developing more complex attack infrastructure powered by agentic AI capabilities and AI-enabled automation.

Frameworks such as ARTEX compress attack timelines to machine speed; however, they currently trade stealth for velocity. Unrestricted autonomous execution generates forensic traffic, relies on recognizable identifiers, and leaves behind distinct code-level traces, increasing the likelihood of detection and mitigation. These tools are therefore best suited to scenarios in which the cost of detection is low. Additionally, detection and disruption/response are two different functions–simply detecting the attack in time does little to hinder objective completion.

Consequently, GTIG assesses with high confidence that cyber crime threat actors will continue incorporating autonomous offensive tools into their operations, given that the increased reach of their campaigns will likely compensate for any decreases in success rates. We anticipate that actors, who specialize in stealthy operations designed to maintain long-term access, are less likely to use the publicly available versions of these tools, though they may employ them for purposes of scale and speed, depending on operational priorities. Regardless of motivation, the low barrier to entry, ease of integrating new exploits, and massive scaling potential make autonomous frameworks an attractive, low-cost force multiplier for a wide range of threat actors, making it highly likely that we will continue to see increasing threat actor adoption of these types of frameworks in the near term.

Defending Against AI-Enabled Attacks: Five Layers of Defense

LLM-enabled offensive tooling does not fundamentally change the techniques attackers use. It reduces the time required to combine them. Credential discovery, permission testing, lateral movement, and data access that previously required hours of operator effort can now occur in minutes, frequently through valid identities and supported functionality that static indicators will not detect. Organizations are best positioned to withstand this when compromise of a single identity, credential, or workload provides only limited access. Restricting control-plane exposure, replacing long-lived secrets with short-lived and tightly scoped credentials, segmenting application tiers, and placing guardrails on high-impact business functions all reduce the speed advantage automation provides. Behavioral detection addresses the activity that these controls do not prevent, but it depends on having sufficient identity, control-plane, data-plane, and network telemetry to establish what normal activity looks like. Many of these controls are already familiar to defenders. The difference is that automated tooling can now identify and exploit the gaps between them far more quickly.

As illustrated above, LLM-enabled offensive tooling is increasing the speed and scale of cyber attacks. LLM-enabled and autonomous tools can identify weaknesses, test access, interpret errors, adjust their approach, and continue through an attack path with limited human interaction. Work that might previously have required an operator to investigate an environment, write or modify code, troubleshoot failures, and execute the next step over several hours can increasingly happen in minutes.

This creates a detection challenge as well. Much of the activity may use valid credentials and supported functionality (living-off-the-land, LotL). An attacker may authenticate with a legitimate service principal, call a normal management API, access cloud storage through a supported protocol, or execute commands through an existing administrative interface. Tool names, hashes, IP addresses, and other static indicators provide useful signals when available, but they will not cover much of this activity.

Effective defenses combine two capabilities:

  1. Controls that limit what an attacker can do after gaining valid access.
  2. Telemetry that shows when an identity, application, or workload begins operating outside its normal pattern.

How Adversarial Use of LLMs Changes the Attacker Timeline

Several themes repeatedly appear during investigations involving LLM-enabled or highly automated attacker activity:

Mandiant recommends structuring enterprise defenses across five foundational layers designed to restrict lateral movement and limit the speed advantage of autonomous tooling:

Table 1: Foundational layers for restricting adversarial LLM speed advantage and lateral movement

Layer 1: Protect the Control Plane

Restrict access to the systems attackers can use to administer, deploy, or reconfigure the environment.

The control plane extends well beyond Active Directory or a cloud console. It includes identity providers, cloud management APIs, network and firewall management platforms, virtualization infrastructure, code repositories, CI/CD systems, privileged access management platforms, backup infrastructure, certificate authorities, SaaS administration consoles, and application administration interfaces.

Why It Is Important

Internet-accessible management interfaces can quickly become part of an attack path after credentials are obtained. For example, Azure App Service includes an administrative interface through Kudu Site Control Manager, or SCM, which supports application deployment and management functionality. If an attacker obtains publishing credentials or another identity capable of accessing that interface, automation can quickly test authentication, enumerate functionality, interact with application files, execute commands, retrieve output, and remove staged artifacts.

Similar exposure exists across firewall administration, virtualization consoles, cloud management APIs, backup platforms, CI/CD interfaces, and other management services. Any reachable administrative path gives an automated attacker another capability to test.

Mitigations

Layer 2: Restrict Identities and Keys

Reduce the value of stolen credentials by limiting their lifetime, permissions, and where they can be used.

Security programs have traditionally placed more emphasis on human identities. Service principals, service accounts, API keys, storage keys, cloud access keys, deployment tokens, personal access tokens, and application secrets can receive less scrutiny despite providing significant access.

Programmatic identities are especially useful to an automated attacker when they combine long-lived credentials, broad permissions, limited conditional controls, and limited monitoring.

Why It Is Important

Consider an exposed cloud storage credential. Once automated tooling discovers the credential in source code, an environment variable, application configuration, a database, or another compromised system, it can immediately test the credential and begin enumerating available data.

A long-lived credential that works from anywhere on the internet and provides broad storage access can turn a single credential exposure into large-scale data access very quickly.

The same pattern applies to service principals and other programmatic identities. A credential intended for an internal CI/CD runner carries considerably more risk when the identity can also authenticate from an arbitrary network and access production resources.

Credential security therefore needs to address both what an identity can access and the conditions under which that access is valid.

Mitigations

Layer 3: Harden Configurations and Reduce Attack Paths

Remove weaknesses that provide an initial foothold and limit how far a compromised workload can reach.

Automated tooling is particularly effective in environments where several smaller weaknesses can be combined into a larger attack path. An exposed application, an overly privileged workload identity, a credential in an environment variable, and unrestricted network access may each appear manageable in isolation. Together, they can provide a direct path into sensitive systems.

Why It Is Important

A vulnerability in an internet-facing application may initially appear isolated. In practice, that application may have access to a backend database. The database may contain credentials. Application environment variables may contain cloud tokens. The underlying host may have an attached cloud identity with access to storage, secrets, or management APIs.

Automation can test those paths in rapid succession. Failures can also become useful feedback. An application error, stack trace, database response, compiler output, or API error may give the tooling enough information to modify its next request within seconds. Detailed diagnostic information exposed externally therefore provides more than troubleshooting value; it can accelerate experimentation during an attack.

Mitigations

Layer 4: Application Protections

Harden legitimate enterprise functionality that attackers can reuse after gaining access.

A large portion of attacker activity relies on capabilities already present in the environment. Applications, authentication protocols, administrative services, scripting environments, messaging systems, deployment platforms, and business workflows may provide everything needed to continue an intrusion without introducing new malware. Automation makes these capabilities easier to discover and use quickly.

Why It Is Important

Internal business applications, scripts, and APIs are often customized to each organization without public documentation, and require a level of insider knowledge to understand exploitation opportunities. Automated LLM-powered offensive tooling has enabled attackers to enumerate and rapidly understand these internal applications and use them to their advantage.

Internal communication functionality is one example. A compromised application account may legitimately have access to a notification, messaging, or email API. Sending messages is expected behavior for that application. That same capability can be abused to send hundreds or thousands of phishing messages. Without recipient limits, rate limits, or behavioral monitoring, a standard business function can become a high-speed distribution mechanism.

Mitigations

Layer 5: Detect Behavioral and Volumetric Change

Detect when identities, applications, workloads, and infrastructure begin operating outside their established patterns.

Many actions performed during an automated attack are legitimate operations when viewed individually. Detection therefore depends heavily on context: identity, source network, volume, timing, sequence, target resource, and historical activity.

Why It Is Important

A service principal accessing cloud storage is not necessarily suspicious. A service principal that normally accesses ten objects from one internal network and suddenly downloads thousands of objects from an unfamiliar hosting provider is a different situation.

Outbound activity provides similar context. Automated tooling on a compromised server may contact external webhook services to confirm execution or transfer results. It may also communicate with LLM platforms, temporary file-sharing infrastructure, tunneling services, or attacker-controlled systems.

A single HTTPS connection may be routine. A production server that historically communicates with a small set of known destinations and suddenly begins reaching several new external services deserves closer attention.

Mitigations and Detection Priorities

Google Security Operations (SecOps)

Google SecOps customers have access to these broad category rules and more under the Mandiant Frontline Threats and Mandiant Hunting Rules rule pack. The activity discussed in the blog post is detected in Google SecOps under the rule names:

Related articles

Threat IntelligenceGTIG AI Threat Tracker: Agentic Threat Activity Crosses a Significant ThresholdBy Google Threat Intelligence Group • 32-minute read

https://storage.googleapis.com/gweb-cloudblog-publish/images/03_ThreatIntelligenceWebsiteBannerIdeas_BANN.max-700x700.png

Threat IntelligenceThe Rise of LLMJacking: How Threat Actors Monetize Compromised Cloud and Model ResourcesBy Google Threat Intelligence Group • 16-minute read

https://storage.googleapis.com/gweb-cloudblog-publish/images/03_ThreatIntelligenceWebsiteBannerIdeas_BANN.max-700x700.png

Threat IntelligenceShutting the Door on the XCPE BotnetBy Google Threat Intelligence Group • 76-minute read

https://storage.googleapis.com/gweb-cloudblog-publish/images/03_ThreatIntelligenceWebsiteBannerIdeas_BANN.max-700x700.png

Threat IntelligenceARMORY CASTLE Exploits BeyondTrustBy Google Threat Intelligence Group • 19-minute read

https://storage.googleapis.com/gweb-cloudblog-publish/images/03_ThreatIntelligenceWebsiteBannerIdeas_BANN.max-700x700.png

原文链接:https://cloud.google.com/blog/topics/threat-intelligence/artex-and-friends-enter-agentic-offensive-frameworks